How to use a laminate router bit

How to use a laminate router bit

In this article, I will tell you how to use a laminate router bit? As you know that every router bit has a specific purpose and functionality. Mostly craftsman already knows about some router bits. If you are an older worker or a newbie, then maybe you don’t know about the usage of the router bits because these bits are trendy and come new in the market. The laminate router bits make work simpler and easy to use when you have the right knowledge about them.

After knowing other router bits which I have already explained, now I am going to discuss how to use a laminate router bit? Another router bit which would be helpful for you.

If you wanted to know about the usage of other router bits I write a complete guide on it. One router bit can do a specific task but some router bits use for multiple tasks. If you wanted to know how to use a laminate router bit then must read this article.

Used for making doors, kitchen shelf edges, laminate countertop, etc. You will be happy to know that you can easily and quickly laminate the edges of the countertop with a router. You can do your tasks perfectly by using a flush trim router bit which is used for laminating.

There are many laminating router bits used for trimming if you don’t have this type of router bits or you don’t know about laminate router bits then visit our website to know about the product and check on Amazon and buy it.

The main thing that you need to know if you are a newbie is that tool necessary in laminating the edges is the trim router. A trim router is the most versatile and lightweight tool. Please don’t use any local trim router for your project, this will damage your work. So think again for choosing the right router for your project. I will recommend you to choose the trim router which is available on Amazon.

 Are you ready for knowing, how to use a laminate router bit? 

LET’S BEGIN!

Before discussing the usage of the laminate router bit, you must know the things that are required for laminating the countertop or any other thing that you want to do in your home or kitchen.
Things that are required in your shop for laminating are given below:
  • Trim router
  • Laminate router bit (recommended flush trim router bit) you can use other laminate router bit. It’s up to you.
  • Piece of wood
  • Masking tape

How to use a laminate router bit or how to use a flush trim router bit?

Both questions have the same answer. So, we are going to start laminating the edges of the wood piece with a laminate router bit and trim router.

Let’s start this step by step.

Choose the best router bit and a router for your project. It’s very important to start anything that you have exact tools for the work.
Step 1:

Take a piece of wood you want to trim. As seen in the picture, both pieces have different edges. One piece of wood has an excess part which is I am going to trim and will make it equal to the other piece of wood.

How to use a laminate router bit

Step 2:
I am using flush trim router bit and will recommend you, bearing on the bottom of the bit will be used for trimming.

How to use a laminate router bit
Step 3:
Take a trim router and place the router bit in it and make sure that your router is unplugged during inserting bit. Now plug the router and start trimming along the wood. If you see that until there is a difference between both pieces of wood then do the same work for the second time.

How to use a laminate router bit
Step 4:
You will see the result in the picture. It looks very nice and perfect.
I hope that this method will help you in your work and you learn a lot of new things.
It’s a simple use of a laminate router bit.

How to use a laminate router bit

how to use a laminate router bit to trim countertop edges?

Step 1:
The first step to do is to clean your countertop where you want to trim the edges.

Step 2:
Now take a masking tape or sheet and place it on the surface of the laminate. It will help you to protect your laminate from scratches.

Step 3:
Before putting laminate router bit in the router, make sure that your router is unplugged. Now, put the flush trim router bit or any bit you have for this purpose in the trim router and adjust the depth of the router bit according to the countertop edge.

Step 4:
Plug your router. Place the router on the working piece and start trimming the edges. Try to use the router continuously otherwise, the problem will occur. You will see that the results are amazing.

Conclusion

After reading this article, I hope that you are ready to use your laminate router bit. Many router bits can do the same work but the choice is yours. Laminate router bits are amazing tools in woodwork. This will help you to make your work perfect and easy. You will enjoy and definitely will be happy after using these bits. I try my best to cover this article completely and make it helpful for you. Now it’s your time to make your products perfect. If you have any query related to this topic you are welcoming to ask them in the comment section. Best of luck with your work!

Woodhutt Team

Best Router Bits Sets in 2019 | MLCS, Freud, and Yonico Router Bits

How to use a dovetail router bit?

How to Use Wood Router Bits | Router Bits for Beginners

How to use a bullnose router bit?

How to use a tongue and groove router bit?

What router bit to use for sign making?

Leave a Comment

Your email address will not be published. Required fields are marked *

error: Content is protected !!